COOLING RING
The cooling ring is a single-body HPDC component. It is fitted on a shot sleeve and connected to the coolant on a separate cooling circuit, eliminating the risk of leakage.
General Information
The cooling ring is produced using tool steel forged or rolled blocks.
It is designed for a separate cooling circuit.
It is a standard dimensions component that fits all shot sleeves.
Advantages
of HTS cooling ring
No coolant leakage
As the cooling ring has a separate cooling circuit, the sleeve doesn’t need to be drilled and therefore leakages are avoided.
Parameters
Dimensional range
| DIMENSION | RANGE (mm) |
|---|---|
| Diameter | 110 – 320 |
| Inner Diameter | 80 – 250 |
Material
HTS cooling Rings are made using forged tool steel blocks produced in the EU.
The most often used grades are 1.2343/H11.
Based on specific customer needs, other steel grades can be used.
Delivery condition
HEAT TREATED
HARDNESS between 40 and 46 HRC
MACHINED TO FINAL DIMENSION
You can configure your own
iTherm® Cooling Ring
Further Reading
Send us your model to see how iTherm®
can improve your process
Fill in the form below and we will get back to you
